210 Storm

Cardinal’s model 210 STORM indicators are ideal for a wide variety of weighing applications ranging from bench and floor scales to the most sophisticated vehicle scale. The four serial ports and wireless capability with SnapStream ease interfacing with remote displays, printers and PC’s.

225 Navigator

The 225 Navigator weight indicator’s transflective display technology allows the 240 x 64-pixel (5-inch/127 mm W x 1.33-inch/34 mm H) back-lit LCD with 1-inch high characters to be viewed under any lighting conditions from direct sunlight to total darkness. With an optional dual scale input board, up to 3 scales with total weights can be viewed simultaneously. Standard features include IP66 washdown stainless steel enclosure, 4 bi-directional RS232 serial ports, USB-B port, QWERTY keypad, 4 soft keys, 13 function keys, navigation keys, 16 Preset Weight Comparators (PWCs), 8 input control lines, 16 output control lines, piece count, batching, electronic tally roll, and 200 ID database for truck storage. NTEP legal-for-trade and OIML certified. Supports up to 14 350-ohm load cells.

480/482 Legend™ Series Digital Weight Indicator

Advance to Rice Lake’s Legend Series—classic Rice Lake quality and design with innovative features for tomorrow. As the flagship of Rice Lake’s Legend Series, the 480 and 482 digital weight indicators have been designed to provide the very best in performance and value.

With stainless steel enclosures and advanced gasket systems, the industrial-strength Legend Series is built for dirty, wet environments and demanding workplaces, inside or out. Advanced circuitry also withstands electrical noise, power disturbances and transient spikes that are common to industrial applications.

Rice Lake’s Legend Series is the industry’s first choice for readability. With a choice between large, ultra-bright LED or LCD displays, 0.8 inch digits and sharp contrast, these indicators provide superior display visibility. The 480’s six-button tactile keypad allows for quick navigation and programming. Advance to the Plus Series for a full numeric keypad.

Connect to a printer, PC or remote display and make use of configurable print formats, time and date function, and local/remote capability. A standard lithium ion rechargeable battery allows operation from remote locations, such as a portable work station.

720i Programmable Weight Indicator and Controller

The 720i™ programmable weight indicator/controller is the first in a line of powerful and intelligent HMI devices from Rice Lake. This weight indicator breaks away from our pack of basic models with its ability to control more processes, more equipment, and more information than ever before.

Automate entire systems by dictating batch formulation, inventory management, or traceability. Capture and store weight data. Link more peripheral equipment. And do it all with incredible ease

The attractive 720i programmable weight indicator/controller presents a complete operator keypad showcased in either universal or panel-mount enclosure styles. Programmable soft keys and operator prompts offer more control for busy industrial settings. Programming is easier than ever using either the standard configurable batch engine or 720i’s exclusive ProAction™ software.

Local remote capability allows multiple indicators to simultaneously display the same data. Truck scale operations, data collection, batching or networking—this multifaceted HMI can handle them all.

The 720i programmable weight indicator/controller comes standard with two full duplex serial ports, eight digital I/O, 20 auxilliary print formats and a complete set of popular features. Plus we’ve included one option slot to use with a selection of networking and option cards. Take your 720i to the next level and create a weight indicator as unique as your process.

920i Programmable Weight Indicator and Controller

The 920i® programmable weight indicator/controller is different, yet intuitively familiar for even the least experienced operators. It is truly the first of its kind to blend revolutionary user interfaces, total flexibility and ultimate processing performance with the simplicity of a basic weight indicator. We have taken the best features from weight instruments, PLCs and computers and added more robust electronics, a crisp graphical display and programmable softkeys. Put it all together inside a virtually indestructible enclosure and you have one of the most advanced HMIs the industry has ever seen. Adding an entirely new dimension in flexibility for solution providers and users alike, the 920i HMI indicator/controller delivers simplified customization at a fraction of the cost of traditional process instrumentation.

From tailored basic weighing to complex process automation, the 920i programmable weight indicator/controller gives you exactly what you need, exactly the way you want it.

Up to ten different screens can be programmed to change with any given process, while graphic icons and messages show setpoint and function status. The multi-channel display feature shows the weight on an individual scale or a combination of totalized scales. When used in batching/mixing applications, one 920i is capable of handling multiple scales, flow temperature and pulse. The 920i can control hundreds of I/O setpoints—queuing for such things as gates and conveyors. The 920i’s complete database capability stores your important data and files.

For more seamless communication with external devices, use the 920i programmable weight indicator/controller with USB. It shares the same hardware as the standard 920i, but replaces the PS/2 interface port with a USB interface. Connector types include Standard Type A for hosting, connecting keyboards, printers and memory devices, and Standard Type B for connecting as a device to PCs.

Delivering more features, more programmability and more power for your process, the 920i HMI indicator/controller combines performance-driven circuitry, simplified architecture and customized display features to take your system further.

1280 Enterprise Series Programmable Weight Indicator and Controller

The 920i® programmable weight indicator/controller is different, yet intuitively familiar for even the least experienced operators. It is truly the first of its kind to blend revolutionary user interfaces, total flexibility and ultimate processing performance with the simplicity of a basic weight indicator. We have taken the best features from weight instruments, PLCs and computers and added more robust electronics, a crisp graphical display and programmable softkeys. Put it all together inside a virtually indestructible enclosure and you have one of the most advanced HMIs the industry has ever seen. Adding an entirely new dimension in flexibility for solution providers and users alike, the 920i HMI indicator/controller delivers simplified customization at a fraction of the cost of traditional process instrumentation.

From tailored basic weighing to complex process automation, the 920i programmable weight indicator/controller gives you exactly what you need, exactly the way you want it.

Up to ten different screens can be programmed to change with any given process, while graphic icons and messages show setpoint and function status. The multi-channel display feature shows the weight on an individual scale or a combination of totalized scales. When used in batching/mixing applications, one 920i is capable of handling multiple scales, flow temperature and pulse. The 920i can control hundreds of I/O setpoints—queuing for such things as gates and conveyors. The 920i’s complete database capability stores your important data and files.

For more seamless communication with external devices, use the 920i programmable weight indicator/controller with USB. It shares the same hardware as the standard 920i, but replaces the PS/2 interface port with a USB interface. Connector types include Standard Type A for hosting, connecting keyboards, printers and memory devices, and Standard Type B for connecting as a device to PCs.

Delivering more features, more programmability and more power for your process, the 920i HMI indicator/controller combines performance-driven circuitry, simplified architecture and customized display features to take your system further.

MSI-8000 RF Remote Display

• Handheld RF remote display with six-digit 1.0 in (26.4 mm) LCD screen
• Membrane keypad for remote control functionality
• User-definable function keys for added versatility
• Universal 115/230 VAC, 50/60 Hz battery charger (NA plug standard)
• Communicates with RF MSI-3460 Challenger 3, MSI-4260 Port-A-Weigh, MSI-7300 Dyna-Link 2, MSI-7000 and MSI-7001 TranSend™

MSI-8000 HD

• Compatible with all ScaleCore™-based products including: MSI-7300 Dyna-Link 2, MSI-3460 Challenger 3,
MSI-4260 Port-A-Weigh, MSI-7000 and MSI-7001 TranSend™, MSI-9600HT and MSI-6360
• LCD display
• IP68 milled aluminum enclosure
• Time and date
• Membrane keypad for remote-control functionality
• User-definable function keys for added versatility
• Swivel tilt stand

SCT-40 Signal Conditioning Transmitter and Weight Indicator Display

Designed for PLC systems that require seamless integration of weight data, the SCT-40 provides reliable signal-conditioning function without the cost or bulk of a full size weight indicator/controller. With eight independent load cell channels, the SCT-40 delivers more power and more control in a compact design.

The versatile SCT-40 is DIN-rail mountable within a cabinet or control panel, where it converts a scale’s load cell signal to analog output, serial output or a fieldbus protocol. Providing more interface surface than its predecessors, the SCT-40 is more technician-friendly and easier to use, which simplifies scale setup, calibration and operation.

SCT-1100 Advanced Series Signal Conditioning Weight Transmitter

Total Control in a Compact Package

The ideal solution for PLC systems which require weight data from a scale, Rice Lake’s SCT signal transmitters offer maximum control without the additional cost or space required of a traditional weight indicator.

These multi-function transmitters have a compact design while presenting the same signal-conditioning functions.

Utilized as an independent or dependent four-channel digital junction box, the SCT-1100 allows for the direct reading and diagnosis of each individual connected load cell or summed as a whole.

SCT-2200 (RL)

Control in Miniature

For PLC systems that require weight data from a scale, Rice Lake’s compact SCT transmitters deliver equivalent signal-conditioning function without the cost or bulk of a full size weight indicator/controller.

Rice Lake’s SCT-2200 is DIN Rail mountable within a cabinet or control panel, where it converts a scale’s load cell signals to analog output, serial output, or a specific network protocol. Unlike many other signal transmitters, the SCT-2200 has its own 0.3 inch weight display, with annunciators for unit and weighing status, and push buttons for zero, tare and setpoint entry, simplifying scale setup, calibration and operation.

Combics® Weight Indicator

Smart software applications

• Easy-to-use application software programmes for a variety of uses, such as counting,checking and pre-packaging checking, are pre-installed as a standard feature

Versatile interfaces

• Optimal connectivity and integration into existing systems, for example via RS 232,RS 485/422, analogue 4–20 mA, digital inputs/outputs, Profibus DP, Ethernet TCP/IP

With the Combics product family, Minebea Intec offers a high-quality scale series for the various applications of the food, pharmaceutical, chemical, metal and electrical industries.
Combics can adjust optimally to different process requirements due to its high flexibility regarding connection and configuration options.

Midrics 1, MIS1UR-V1

Midrics 1 Indicator (Table Top Version with U-Bracket and RS232), Display 20mm LCD, backlit, Material: stainless steel, ingress protection:
IP65, Midrics Indicators are Class III NTEP approved.

Midrics 2 MIS2UR-V2

Midrics 2 Indicator (Table Top Version with U-Bracket and RS232), With selectable application programming, display 20mm LCD, backlit,
numerical keyboard, applications: weighing, counting, checkweighing, sorting (3 or 5 classes), totalizing, net-total, animal weighing, weighing
in percent, neutral measurement, material: stainless steel, ingress protection: IP65, Midrics Indicators are Class III NTEP approved.

Minebea Intec Combics 1 Indicator CAIS1-U and CAISL1-U

Combics provides support in all areas of your process chain, from manual formulations up to PC controlled production checks. The modular system allows tailor-made configuration of the individual components for each area. We also produce individual complete solutions according to your specific applications.

Based on the specific requirements of various industries and the basic legal conditions, Sartorius has developed intelligent solutions for all weighing applications, from incoming goods through to production on a large technical scale.

The Combics series supports the production of high-quality, appealing and safe products. The unrivaled precision of Combics helps

• control flexible production
• reduce costs
• improve product quality
• raw materials to be used optimally
• increase output

A design made for longevity and flexibility stands for reliability.

Minebea Intec Combics 2 Indicator CAIS2-U and CAISL2-U

Combics provides support in all areas of your process chain, from manual formulations up to PC controlled production checks. The modular system allows tailor-made configuration of the individual components for each area. We also produce individual complete solutions according to your specific applications.

Based on the specific requirements of various industries and the basic legal conditions, Sartorius has developed intelligent solutions for all weighing applications, from incoming goods through to production on a large technical scale.

The Combics series supports the production of high-quality, appealing and safe products. The unrivaled precision of Combics helps

• control flexible production
• reduce costs
• improve product quality
• raw materials to be used optimally
• increase output

A design made for longevity and flexibility stands for reliability.

ZM Series Controllers

The ZM series controller will accommodate various ZM series panel mount indicators along with the ZM options making it
versatile for many applications. Two types of enclosures are available; Stainless Steel or Carbon Steel with the IP rating for most
indoor / outdoor applications. Indicators and option kits sold separately.

882IS (RL)

Designed for hazardous locations that are potentially explosive, the 882IS digital weight indicator is built to safely operate in these settings without sacrificing performance. With cFMus, ATEX and IECEx approvals, the 882IS is the industry’s choice for flammable and combustible applications such as fuel refineries, chemical plants, distilleries, textile manufacturing and more.

ZM400 Series Indicators

Enclosures
The ZM400 series are IP69K certified Indicators with 304 brushed stainless steel. Designed for long service in extreme conditions, including corrosive environments and frequent, heavy washdown, these Indicators are available in desk, wall or column mount versions.

Keypads
The ZM401 weight Indicator features six operational keys, including Zero, Print, Units, Tare, Select and F1. Built-in operational routines or applications can be configured at the time of installation, tailored to your requirements.

The addition of a more comprehensive 24 key alphanumeric keypad allows ZM405 Indicator users to store multiple tares and alpha numeric IDs in the internal memory for easy retrieval and for simple entry of values. Both models also support the addition of a USB keyboard.

Exceptional flexibility
At their simplest, the ZM401 and ZM405 weight Indicators are compatible with a wide range of weighing platforms: bench and floor scales, truck scales, scales for batching, counting and checkweighing.

Dot-matrix graphical display
High contrast, nine segment IBN display technology provides excellent color contrast and enhanced viewing angles.

Multi-scale input
Supports up to 16 analog weight sensors and can receive two scale input signals,allowing users to collect and manipulate data from more than one scale at a time.

High Connectivity Indicators
The ZM400 series of Indicators offers multiconnectivity, ensuring compatibility and
communication between old and new peripheral technologies.

An Ethernet port is included as standard, two RS232 serial interface ports provide data transfer to older equipment and a USB host port facilitates communication with printer or keyboard and data transfer via a USB storage device.

Analog output, USB device, Current Loop, RS485/ RS422 and Ethernet wireless options are also available.

ZM605 Weight Indicator

A flexible and programmable weight indicator, the ZM605 offers an ideal solution for custom requirements. Multiple built-in communication technology ports give users the ability to display, store and transmit data across devices.

Dot-matrix graphical display
The ultra-bright green and black graphic Improved Super Twisted Nematic (ISTN) display provides excellent visibility and colour contrast. With its wide viewing angles, the high-contrast display is easily visible in extreme working environments and can be inverted for optimum viewing in brightly lit locations.

Enclosures
Constructed for use in the office, dusty, wet or high pressure, heavy washdown (food) and outdoor environments, the desktop ZM605 is IP69K certified and enclosed in 304 brushed stainless steel. Designed to be flexible, the indicator also adapts to desk, wall or column mount applications and is also available in a stainless steel IP66 panel mountable version.

Keypads
The ZM605 features an alpha-numeric keypad with chemical resistant, metal domed keys, which give the user crisp, positive tactile feedback when compressed. Five programmable keys allow specific weighing tasks to be assigned to the indicator, allowing weighing operations to be carried out quickly and effectively. The ZM605 also supports the additional of external USB keyboard and/or a USB storage device for data collection.

Tailored connectivity
Designed to ensure compatibility and communication between old and new peripheral technologies, the ZM605 has multiple serial and USB ports included as standard, with an Ethernet port that can be configured to support ten independent devices, DHCP client/server and Ethernet sockets in addition to serial protocols.

The ZM605 is versatile and flexible enough to adapt to a wide range of applications, from bench to floor scales, outdoor vehicle weighing to weighing in a hygienic food environment.

FB1200

Fairbanks Scales FB1200 is a flexible, economical solution for industrial weighing applications. With a range of features and multiple communi­cation options, the FB1200 can fulfill a variety of customer needs at a highly competitive price. Among basic instruments on today’s market, the FB1200 is unique in that it has a number of “beyond basic” functions

FB7100

In today’s ever increasingly efficient world, there is increased demand for efficient vehicle weighing instrumentation that is intuitive, easy to use, and self-diagnostic. In response to this challenge, Fairbanks engineers developed the FB7100 Series Instrument, a mid-range truck and rail scale instrument that checks all those boxes and so many more. Scale operators will save time and increase productivity thanks to the FB7100’s lightning-fast functionality, touchscreen interface, standard remote scale configuration, calibration and 24/7 diagnostics (via any web browser). Moreover the FB7100 is commercially approved for all legal-for-trade applications. All this at a price that’s so economical it blows away the competition.

For more than 190 years, Fairbanks Scales has engineered and built cutting-edge weighing equipment. We continually combine our experience and expertise with the latest technology in order to offer the next best scale innovation to our weighing customers worldwide.